Trilite is Brett Martin Daylight Systems' standard range of GRP rooflight sheet, meeting minimum required safety standards. Correctly specified Trilite rooflights can generally achieve Class B and Class C non-fragility when new, and are available to meet industry recommendations for non-fragility for 25 years, as outlined in NARM Guidance Note 2006/1. These rooflights are most commonly used in simple, low cost structures where there is little or no roof access required after installation.Trilite sheets are supplied as standard with the ‘Superlife’ enhanced UV protective finish.
Trilite
Features and Options
- Meets the required safety standard Class B non fragile to ACR[M]001:2005
- Weather sheets supplied with ‘Superlife’ enhanced UV surface protection
- Option of advanced ‘Diamond’ surface protection for enhanced durability
- A wide range of profiles to match almost all roof cladding systems
- Available in weights of 2.4kg/m² or 3.0kg/m²
- Excellent light transmission levels
- Trilite 3.0 with a weight of 3.0kg/m2, Trilite 3.0 sheets in typical applications are resistant to damage during construction. They are suitable on projects where there is limited or controlled access needed after construction.
- Trilite 2.4 sheets have a weight of 2.4kg/m2 and are the minimum requirement to achieve Class C liner non-fragility during construction for most profiles and assemblies. They are suitable for projects that will require minimal roof access. If Trilite 3.0 and Trilite 2.4 are used as lining panels, the rooflight will become non-fragile at lining out stage.
- Trilite 1.8 this 1.8kg/m2 sheet is a cost-effective option but only achieves non-fragility when used in a double skin rooflight with Trilite 2.4 and above.