Skip to Content

Brett Martin hatches a plan for easy flat roof access

Glass Rooflights 03.06.2024

Flat Glass Access Hatch rooflight

Safe, easy access to roof spaces

Specialist daylight solutions manufacturer Brett Martin has recently added a Flat Glass Access Hatch to its glass rooflight range. The new product enables the maximisation of daylight into interior spaces, whilst providing easy and safe access to roofs with a flat or gentle pitch. With a wide range of standard sizes available, as well as bespoke sizing capability, any project can now benefit from increased daylight, ventilation and ease of access.

Easy to install and operate, the double-glazed hatch come fully assembled and ready to fit with a thermally isolated aluminium frame, PVC kerb and 24V tandem actuators. A 90% Argon filled cavity unit offers combined U-values as low as 1.72W/m2K. A wind and rain sensor can also be specified to enable improved ventilation with minimal hassle. Plus, the glazing specification can be customised to provide solar control, tinting or obscured glazing should the customer require it.

As with all Brett Martin’s glass products, safety for those above and below the rooflight is assured thanks to a laminated inner pane and a toughened glass outer pane. As a result, the hatch achieves a non-fragility rating to CWCT TN-67, depending on the size, and is Class B non-fragile to ACR[M]001 when new and installed according to the installation guidelines. All Brett Martin glass rooflights come with ten-year warranty for added piece of mind.

Speaking about the launch, Sales Director Tony Isaac commented “With the addition of this new access hatch, our rooflight range now offers a full suite of solutions for any project.”

“Our aim was to make this hatch as versatile as possible so that a project of any size – commercial, domestic or industrial – can benefit from easy and safe roof access and increased daylight and ventilation.”

The Flat Glass Access Hatch is available in sizes from 1000 x 1000mm up to 2000 x 1000mm, or a 1500 x 1500mm square, with a seven working day delivery time available on a number of core sizes.

To find out more information and download a brochure, go to


News & Events